There are a lot of steps to releasing a new version of ElectrumSV. This document is intended to lay out the entire proces and some of the reasoning behind it, so that any developer can jump in and do a release if necessary. In addition, formalising the release process ensures that nothing is accidentally left out due to any informal and casually documented process leading to an oversight of various steps.
When it is time to release a new version, the first step is to freeze the release branch in Github and prevent introduction of any changes that introduce new functionality or change existing functionality. This is an exercise in self restraint, rather than anything that is done to programmatically disallow these changes to be made.
Writing an article¶
An initial outline of a release article is written, including the featured changes that will be highlighted. Mostly this involves taking the last article, removing all the changes that were included in the previous version, and putting the new version’s changes in their place using the same format. The key goal of these articles is to illustrate these changes and help users visualise them even if they skim through the article, and it should include screenshots at every possible opportunity.
For each change featured in a release article:
A link should be provided to any issue that exists in relation to that change.
A link should be provided to every code change made to the source code in the making of the given change.
Updating the version¶
The version number is increased to the new version number, and the approximate release date is updated to be approximately what it will be when the release is made. If the release process is protracted over many days due to the testing, and any subsequent changes they require, then the date may be modified later.
If the last version was
1.3.6references and replace them with the new version
1-3-6references. These will be in links to the release article for the previous version. The link should be replaced with the link to the new article.
Writing release notes¶
There are two places that changes are documented in the source code. The first is a HTML-based
summary that is accessible from the splash screen that ElectrumSV shows when it starts up. The
second is the text-based formal
RELEASE-NOTES file in the top level of the source code.
The HTML-based summary is intended to be a list of user focused descriptions of the main changes in the release. It lists the same changes as those chosen for the release article.
RELEASE-NOTES file is intended to be developer oriented, and should attempt to list all
the changes made and included in the release.
There are two different kinds of pre-build testing, both manual and automatic. The manual tests are primarily those which involve a user checking the user interface works as it should. The automatic tests ensure the code is correct as it is possible for such a tool to detect, and that when asked to perform processes the outcomes of those processes are as they should be.
User interface testing¶
There is a checklist of common use cases for ElectrumSV that the user interface is manually stepped through. New accounts are created, keys and seeds are imported, invoices are paid, hardware wallets are plugged in and out and most if not all of the menu options are used in order to ensure they still work.
TODO: Reference manual user interface testing documents.
As bugs, problems or small aspects that can be improved are identified, they are fixed and the relevant user interfaces are retested. Along these lines, if intuitively something does not quite seem like it is working, time is spent to work out why.
As a part of normal development, before code changes are committed to the Github source code repository, developers are expected to run code quality tools. If they push the changes to Github and they have made changes that do not meet code quality standards, then the CI process will do those same checks and error. The changes made to both prepare the release and fix any problems observed in the user interface should be tested by the developer.
Python is a programming language with optional typing. For users who choose to use typing, this tool can then try and work out if the code that uses those types is buggy or incorrect.
Running mypy on Windows, Linux or MacOS:
mypy --config-file mypy.ini --python-version 3.7
This tool checks for general code correctness and common errors, and warns the developer if it finds any.
Running pylint on Windows, Linux or MacOS:
pylint --rcfile=.pylintrc electrum-sv electrumsv
The existing collection of unit tests ensure that a range of processes work correctly. This includes how the code handles different kinds of accounts, migration of wallets from older versions to newer versions, old Electrum seed words, new Electrum seed words, BIP39 seed words, different key types and so on. Running these against lower level changes can often help detect regressions or oversights made in implementing those changes.
Running the unit tests on Windows:
Running the unit tests on Linux or MacOS:
Building the release¶
The continuous integration (CI) service is hooked up to Github. Every time a set of changes are pushed to Github it automatically triggers the CI to test and build those changes. Every build results in what are called a set of artifacts, which are the executables and archives produced as a result of that build. If the developer adds a Git tag structured in a way to designate a release version to the changes they push, then this modifies the build process and produces an official versioned set of build artifacts.
Tagging the latest code as a potential stable release of a
git tag sv-1.3.7
The developer than pushes both the latest code and the tag to Github, both separately, and in that order:
git push git push --tags
A build is only triggered if unpushed code changes are pushed. And the build only looks for the release tag at the start. So the developer needs to push unpushed code changes, and then the new release tag in quick succession.
The build runs all the tests that the developer should run before they push the final changes. If they fail, or their development tools are out of date, this might mean that either the developer did not run the tests correctly or that the developer needs to update their tools.
Recapping the automated tests employed:
The unit tests.
The functional tests.
Pylint for style and correctness checking.
Mypy for type checking.
If there are build errors or the build needs to be rerun, the developer needs to delete the tag and recreate it, and push a new tag with additional code changes to trigger a new build.
Deleting the local tag for a
git tag --delete sv-1.3.7
Deleting the remote tag for a
git push origin --delete sv-1.3.7
Testing the build¶
Once a successful candidate build has been made, the build artifacts are downloaded. One
artifact is deleted, the Windows installer which is named with the
At this time we do not support this or test it, and in the longer term we will provide this
in the form of a Windows Store application.
The build testing is not extensive. If a build executable runs and the wallet user interface appears, then all testing of both functionality and user interface within the pre-build testing will represent how the build behaves.
There are no Linux builds at this time, so there is no need for testing at this stage.
If a member of the community creates an AppImage build process that is of sufficient quality, we would be willing to help them maintain it and use it in producing official Linux builds.
The build is downloaded to a MacOS device, and run.
The following trivial steps are tested:
Funds are sent to the wallet on the MacOS device.
The funds are then sent back out to an external wallet.
There are two builds on Windows, a portable build and a non-portable build. A quick recap on the difference is that the portable build stores it’s data in a directory local to the portable build executable. The non-portable build stores it’s data in the user’s application data directory.
The following trivial steps are tested for the non-portable build:
Funds are sent to the wallet on the MacOS device.
The funds are then sent back out to an external wallet.
The non-portable build is merely started, and if the user interface appears and the wallet selection screen can be reached, it is deemed sufficient.
There are a range of steps to doing the deployment.
The build files are currently hosted for download on Amazon S3 storage rather than on the web site. This was initially done in order to try and reduce the false positive flagging for Malware that ElectrumSV gets on Windows, because of it’s use of Pyinstaller. The process of uploading these is intended to be paranoid to ensure that the files uploaded are the actually the ones the CI process produced.
After the build artifacts are uploaded to Amazon S3 storage, they are re-downloaded and the SHA256 hash of each is compared to those that CI produced by redownloading the build hashes from CI.
Besides reflecting the latest release, another function of the web site is that it hosts a JSON file with signatures from at least one developer for the given release version and date. This is used by the update checker to alert users that there is a new release. The web site also hosts the GPG signatures from at least one developer, which need to be added before it is generated.
The keys used to verify that a release has been signed by a known developer are hard-coded into each build. This makes it difficult to add new signing developers, as users with older builds will lack the keys for those new developers, those builds will appear illegitimate. It is probably a good idea for the process to change sooner rather than later to prepare for working around this.
One or more of the developers can sign to announce the release of the build, and each should do the following:
Take the release version which might be
Take the release date which might be
Combine them which in this case will result in
Go into the signing wallet and select the signing key.
Select the Sign/verify message menu.
Enter the combined text.
Click the Sign button and enter the wallet password.
Copy the signature and place in the release.json file.
The existing release.json file is included in the web site generation content, and should be updated and it will automatically be included in the generated web site.
In addition to hashes proving the integrity of downloaded build files, there are also GPG signatures that indicate who they came from. The public keys of the developers who might sign the build files are in Github much like the SHA256 hashes for each build file.
A sub-directory should be made within the download web site content directory for the release version, and the GPG signatures for each new build file placed in there.
With GPG signatures and release version signatures in place, and also updated for the new version and build files, the final web site can be generated and put in place on the ElectrumSV web host. The generation instructions documented in the web site directory. Assuming that the developer has already been generating the web site in the past, the following commands are all they need to do one final generation.
cd docs cd website pelican -s pelicanconf.py
Standard deployment steps need to be followed and the new uploaded html directory needs to match the existing one in the following ways:
The same owner using
The same permissions using
The documentation is hosted on the Read the Docs service. As changes are pushed to the Github repository, Read the Docs is notified and they fetch the changes and trigger an update of the documentation. This mostly benefits users being able to view development documentation. The deployed documentation for a given release cannot change any time post-release development changes are made.
After the tag for the release changes is pushed to Github, a developer needs to add it to the
list of tags that Read the Docs is hosting documentation for. And then they need to make it the
default tag so that the documentation URL
electrumsv.readthedocs.io goes there by default.
At this point the documentation, the web site, and almost all other changes should be present in
Github. The one thing that may be missing is the SHA256 hashes for the build files, which
need to be added to the file
build-hashes.txt in the source code, and pushed as well.
Beyond that they need to be merged into
the master branch,
which is the place we recommend users go to find them.
Github has it’s own system for projects to make releases, and we do use that, but we do not
use it to release build files. It’s primary used to formally designate the release tag as
a new release, and associate it with a list of the changes in the release. The changes listed
there are taken directly from the
Release article publication¶
This should just be a matter of applying any final polish to the already prepared release article and pressing whatever resembles the Publish button.
The link to the release article should be posted to the following places with some additional decorative text.
The Metanet.ICU slack.
The Atlantistic Unwriter slack.
TODO: Guidelines to how we write the standard decorative text should be added here.
The release checklist¶
It is not realistic for developers to read this document when they want to make a release and step through the description of the process. Instead, they should refer to the following checklist and where necessary refer to the description of the process for context and further details.
TODO: Formalise the above as a list of concrete steps.